Skip to content
ASTERON

POWER CENTER EXPLORER

Explore an engineered power center

Switch between architectures, open each component to see its role in the system, and build a concept to discuss with an ASTERON engineer.

Architecture

Use arrow keys to move between components, Enter to open details and Space to add or remove a component.

Scroll sideways to see the whole diagram.

Hybrid power center

Solar supplies energy when it is available, battery storage absorbs the variation and covers short peaks, and thermal generation provides firm capacity. The energy management system decides which source carries the load at every moment.

Your concept · Hybrid

Text description of this diagram

Components in this architecture

  • Diesel generation — Firm, dispatchable power from diesel generator modules.
  • Gas generation — Continuous generation on pipeline gas, LPG or biogas.
  • Solar PV — Renewable energy that displaces fuel during daylight hours.
  • Battery storage — Stores energy and responds faster than any engine.
  • Power conversion — Bidirectional link between the DC battery and the AC system.
  • Transformer — Matches generation voltage to the distribution voltage.
  • Main switchgear — Connects every source and protects the system.
  • Distribution — Delivers power to the facility's load groups.
  • Your facility — The reason the system exists.
  • Energy management — Decides which source carries the load at every moment.

Energy and control flow

  • Diesel generation supplies Transformer
  • Gas generation supplies Transformer
  • Transformer supplies Main switchgear
  • Solar PV supplies Main switchgear
  • Battery storage exchanges power with Power conversion
  • Power conversion exchanges power with Main switchgear
  • Main switchgear supplies Distribution
  • Distribution supplies Your facility
  • Energy management controls Diesel generation
  • Energy management controls Gas generation
  • Energy management controls Solar PV
  • Energy management controls Main switchgear
  • Energy management controls Power conversion

02 — Why engineering comes first

The same capacity. A different system.

Two suppliers can quote the same output. What differs is whether the plant was selected from a catalogue or engineered from the load.

CONVENTIONAL SUPPLY

Capacity divided by unit size

  • Sized from a single capacity figure
  • Equipment chosen before the load is understood
  • Interfaces between suppliers left to the site
  • Problems appear at commissioning

ENGINEERED BY ASTERON

Architecture derived from the load

  • Sized from the load profile and duty
  • Sources, storage and control selected as one system
  • Every interface defined before manufacture
  • Verified at the factory, before shipment

What shapes the architecture

  • Load profile
  • Peak vs. continuous demand
  • Redundancy
  • Operating conditions
  • Fuel availability
  • Grid availability
  • Climate
  • CAPEX / OPEX
  • Total cost of ownership
  • Regulations

Start with your load

Tell us about your load. We’ll engineer the system.

Share what you know about your project — even if some of it is still undecided. Our engineers review every inquiry.

No price lists. Every proposal is engineered to your project.