Skip to content
ASTERON

IND-06

Power systems for Healthcare

In a hospital, the power system protects patients. ASTERON designs standby and emergency supply so critical areas remain energised and the system can be tested without risk.

Typical architecture — illustrative, not a project designOpen in Power Center Explorer

01 — Challenges

What the power system has to handle

  1. 01

    Life-safety loads

    Operating theatres, intensive care and life-support systems require supply restoration within strict limits.

  2. 02

    Load prioritisation

    Loads must be separated by criticality so essential services are restored first.

  3. 03

    Testing without disruption

    Regular testing is mandatory, and must not interrupt clinical services.

  4. 04

    Noise and emissions

    Plant is usually close to occupied buildings and must meet local limits.

02 — Architectures

Typical system architectures

  1. 01

    Redundant standby generation

    Generator sets with automatic transfer and prioritised load restoration.

  2. 02

    Storage-bridged supply

    Battery systems maintaining critical loads during generator start.

  3. 03

    Solar-supported facility supply

    Rooftop PV reducing operating cost while standby plant secures resilience.

  • Standby
  • Redundant
  • Critical loads
  • Low-noise

03 — Related

Continue exploring

Solution

Diesel Power Plants

Prime, continuous and standby diesel generation engineered as a complete plant — synchronised, protected and ready to connect.

Solution

Battery Energy Storage

Battery energy storage systems engineered for a defined role: generator optimisation, peak shaving, backup or renewable integration.

Solution

Solar PV Systems

Ground-mounted and rooftop solar PV for industrial and commercial sites, integrated with the generation you already depend on.

Engineering

Power System Assessment

A structured review of your load, site and constraints that defines what the power system actually has to do.

Engineering

Commissioning Supervision

Supervised energisation, testing and tuning on site until the system operates as designed in every mode.

Start with your load

Tell us about your load. We’ll engineer the system.

Share what you know about your project — even if some of it is still undecided. Our engineers review every inquiry.

No price lists. Every proposal is engineered to your project.