Skip to content
ASTERON

EQP-05 / TX

Transformers

Transformers connect the voltage levels of a power system. ASTERON specifies them for the sources they serve — generators, inverters or the grid — and the conditions they operate in.

Typical architecture — illustrative, not a project designOpen in Power Center Explorer

01 — Overview

Specified as part of a system

A transformer serving inverter-based sources or non-linear loads faces different stresses from one on a conventional distribution network. Rating, impedance, vector group and tapping range are selected within the system design.

Cooling method, insulation and enclosure are chosen for the climate and installation — outdoor, indoor or within a containerised module.

02 — Configurations

Available forms and options

  • Oil-immersed and dry-type designs
  • Generator step-up and distribution step-down duty
  • Transformers for PV and battery inverter connection
  • Off-circuit or on-load tap changing
  • Outdoor, indoor and skid- or container-mounted arrangements

03 — Specification

Defined per project

ASTERON does not publish catalogue ratings or prices. Each parameter below is fixed in the project specification after the assessment.

Transformers — Specification
Rated powerAvailable on request — specified per project
Primary and secondary voltageAvailable on request — specified per project
Vector group and impedanceAvailable on request — specified per project
Cooling methodAvailable on request — specified per project
Tapping rangeAvailable on request — specified per project
Applicable standardIEC, IEEE or as required by the project

Applications

Where it is used

  • Generator step-up
  • Facility distribution
  • Solar and storage connection
  • Grid interconnection

Documentation

What is supplied with it

  • Technical datasheets and general arrangement drawings
  • Electrical schematics and single-line diagrams
  • Factory test reports
  • Operation and maintenance manuals
  • Conformity documentation as required by the destination market

04 — Related

Continue exploring

Solution

Integrated Power Centers

The complete energy center: generation, storage, transformation, switching, control and distribution engineered as one system.

Solution

Diesel Power Plants

Prime, continuous and standby diesel generation engineered as a complete plant — synchronised, protected and ready to connect.

Solution

Solar PV Systems

Ground-mounted and rooftop solar PV for industrial and commercial sites, integrated with the generation you already depend on.

Engineering

Equipment Selection

Selecting each component on technical merit for the application — ratings, configuration and options defined by the design.

Engineering

Engineering Design

Electrical and mechanical design of the complete power system, from single-line diagram to equipment specifications.

Start with your load

Tell us the duty. We’ll define the specification.

Share what you know about your project — even if some of it is still undecided. Our engineers review every inquiry.

No price lists. Every proposal is engineered to your project.